InvisaGig QuadLink Antenna – Outdoor PoE Antenna and Enclosure – Full System

Introducing the InvisaGig QuadLink Antenna – Outdoor PoE Antenna and Enclosure.

A 4×4 MIMO outdoor antenna, and PoE (Power over Ethernet) enclosure in a complete kit; designed for a PoE powered outdoor installation of the InvisaGig 5G Modem system.**

The QuadLink supports 4G and 5GNR bands in the frequency range from 600MHz – 6000MHz, in a full 4×4 X (±45°) polarized format.

This means it works on ALL US carrier bands on both 4G and 5G systems. (And MANY worldwide bands)

• Stand Alone 5GNR band support: n1/ 2/ 3/ 5/ 7/ 8/ 12/ 13/ 14/ 18/ 20/ 25/ 26/ 28/ 29/ 30/ 38/ 40/ 41/ 48/ 66/ 70/ 71/ 75/ 76/ 77/ 78/ 79
• Non-Stand Alone 5GNR band support: n1/ 2/ 3/ 5/ 7/ 8/ 12/ 13/ 14/ 18/ 20/ 25/ 26/ 28/ 29/ 30/ 38/ 40/ 41/ 48/ 66/ 70/ 71/ 75/ 76/ 77/ 78/ 79
• LTE Band Support: B1/ 2/ 3/ 4/ 5/ 7/ 8/ 12/ 13/ 14/ 17/ 18/ 19/ 20/ 25/  26/ 28/ 29/ 30/ 32/ 66/  71
• mmWave Support: Not Supported

The QuadLink antenna includes everything you need to get your system up and running. We supply the 4×4 MIMO antenna with plenty of open enclosure space to keep heat levels down, and plenty of clearance for your modem to breath. The QuadLink has a mounting plate made just for the InvisaGig modem, including a tool to secure the plate in place. A Heavy Duty articulating mounting system that can be used on both flat wall surfaces as well as round masts/poles. A hex key tool for securing the antenna/enclosure mounting arm onto the antenna back. A 72 Watt 48 Volt PoE++ rated power injector. 50′ of solid copper Cat6 outdoor rated Ethernet cabling. A 48v to 12V 3A PoE Splitter to power your 12V system from 48V PoE power. A SIM slot on the enclosure case, so you do NOT need to open the enclosure to change SIM cards.

Parts included in the Full Kit version:

• QuadLink Antenna Assembly
• Heavy duty articulating mounting system for flat wall or round post/pole mounting.
• Hardware and tool for adjusting and securing the mount to the QuadLink.
• InvisaGig custom mounting plate, and tool for securing the plate.
• 48V 72W PoE injector with power cable.
• 48V to 12V 3A PoE splitter.
• Nano SIM card to Micro SIM card external to internal SIM slot.
• 50 foot of CAT6 outdoor rated solid copper wire Ethernet cabling.

Parts included in the Antenna Only version:

• QuadLink Antenna Assembly
• Heavy duty articulating mounting system for flat wall or round post/pole mounting.
• Hardware and tool for adjusting and securing the mount to the QuadLink.
• InvisaGig custom mounting plate, and tool for securing the plate.
• Nano SIM card to Micro SIM card external to internal SIM slot.

We will Warranty this antenna for 3 years from the date of purchase.

**Note – The QuadLink antenna works with any 12VDC powered router/modem system (supports up to 36W of continuous 12VDC supply – 3A). Including GL.iNet, Pepwave, MOFI, Cradlepoint, and many others.